Pricing · Delhi, Delhi
Electrician & plumber charges in Delhi
Delhi is our baseline: figures on this page are the unadjusted NCR rates. Travel between neighbourhoods is short, most housing is directly accessible, and society entry is rarely a delay. Where a Delhi job does cost more, it is scope rather than location — older wiring and galvanised pipe take longer to work on than modern equivalents.
- Jobs from
- ₹80
- Against NCR baseline
- at
- Visiting charge
- ₹99–₹149
How these figures are set
Why Delhi prices sit where they do
Delhi runs at the NCR baseline. That is not a different rate card for Delhi — the trade work is identical everywhere we operate. What differs is the time spent around the job, and we would rather show you that as one transparent adjustment than bury it in the line items.
Delhi is our baseline: figures on this page are the unadjusted NCR rates. Travel between neighbourhoods is short, most housing is directly accessible, and society entry is rarely a delay. Where a Delhi job does cost more, it is scope rather than location — older wiring and galvanised pipe take longer to work on than modern equivalents.
Materials are billed separately and itemised on your digital invoice. Where an inspection is needed, the visiting charge of ₹99–₹149 is adjusted against the final bill, so the diagnosis is never charged twice.
Pricing
Switch Replacement charges in Delhi
Faulty switches, sockets & modular plates swapped same day.
| Job | Indicative price |
|---|---|
| Switch or socket module replacement | ₹80 – ₹180per module |
| Modular plate replacement | ₹150 – ₹350per plate |
| Full switchboard rebuild | ₹450 – ₹1,200per board |
| 16A socket for AC / geyser | ₹250 – ₹500per socket |
| Doorbell / buzzer replacement | ₹200 – ₹400 |
These are indicative ranges for typical jobs, not quotes. You see the actual price for your job before you confirm the booking. A visiting charge of ₹99–₹149 applies where an inspection is needed, and it is adjusted against your final bill. Materials are billed separately and itemised on your digital invoice.
Pricing
Tap Installation charges in Delhi
Taps, mixers & health faucets installed leak-free.
| Job | Indicative price |
|---|---|
| Bib cock / pillar tap installation | ₹150 – ₹300per tap |
| Wall-mixer or diverter installation | ₹350 – ₹700per unit |
| Health faucet / jet spray fitting | ₹200 – ₹450 |
| Concealed diverter servicing | ₹600 – ₹1,500 |
| Angle valve replacement | ₹200 – ₹450per valve |
These are indicative ranges for typical jobs, not quotes. You see the actual price for your job before you confirm the booking. A visiting charge of ₹99–₹149 applies where an inspection is needed, and it is adjusted against your final bill. Materials are billed separately and itemised on your digital invoice.
Pricing
Fan Installation charges in Delhi
Ceiling, wall & exhaust fans fitted and balanced — no wobble, no noise.
| Job | Indicative price |
|---|---|
| Ceiling fan installation | ₹250 – ₹450per fan |
| Ceiling fan uninstall & refit (shifting) | ₹350 – ₹600per fan |
| Wall / pedestal fan mounting | ₹300 – ₹500per fan |
| Exhaust fan installationHigher end where a new wall opening has to be cut. | ₹350 – ₹700per fan |
| Fan regulator replacement | ₹150 – ₹350per regulator |
These are indicative ranges for typical jobs, not quotes. You see the actual price for your job before you confirm the booking. A visiting charge of ₹99–₹149 applies where an inspection is needed, and it is adjusted against your final bill. Materials are billed separately and itemised on your digital invoice.
Pricing
MCB Repairs charges in Delhi
Tripping MCBs, DB faults & load issues diagnosed and fixed.
| Job | Indicative price |
|---|---|
| MCB replacement | ₹250 – ₹550per MCB |
| RCCB / ELCB replacement | ₹900 – ₹2,200 |
| Distribution board diagnosis | ₹400 – ₹800per visit |
| DB re-termination & labelling | ₹800 – ₹1,800 |
| Full DB upgrade (6–12 way)Excluding the board and devices. | ₹3,500 – ₹9,000 |
These are indicative ranges for typical jobs, not quotes. You see the actual price for your job before you confirm the booking. A visiting charge of ₹99–₹149 applies where an inspection is needed, and it is adjusted against your final bill. Materials are billed separately and itemised on your digital invoice.
Pricing
Flush Repairs charges in Delhi
Flush tanks, valves & jet sprays repaired or replaced.
| Job | Indicative price |
|---|---|
| Float valve replacement | ₹250 – ₹550 |
| Flush valve / seal replacement | ₹350 – ₹800 |
| Concealed cistern servicing | ₹700 – ₹1,800 |
| Complete cistern replacement (fitting only) | ₹900 – ₹2,200 |
| Health faucet / jet spray replacement | ₹200 – ₹450 |
These are indicative ranges for typical jobs, not quotes. You see the actual price for your job before you confirm the booking. A visiting charge of ₹99–₹149 applies where an inspection is needed, and it is adjusted against your final bill. Materials are billed separately and itemised on your digital invoice.
Pricing
Wiring charges in Delhi
New points, concealed wiring & rewiring with ISI-marked cables.
| Job | Indicative price |
|---|---|
| New light / fan point | ₹350 – ₹650per point |
| New 16A power point (AC, geyser) | ₹600 – ₹1,200per point |
| Concealed rewiring, 2 BHKVaries most with cable size and how many points you keep versus add. | ₹18,000 – ₹38,000 |
| Concealed rewiring, 3 BHK | ₹28,000 – ₹55,000 |
| Fault finding / open-circuit tracing | ₹500 – ₹1,200per visit |
| Earthing check & restoration | ₹800 – ₹2,500 |
These are indicative ranges for typical jobs, not quotes. You see the actual price for your job before you confirm the booking. A visiting charge of ₹99–₹149 applies where an inspection is needed, and it is adjusted against your final bill. Materials are billed separately and itemised on your digital invoice.
Pricing
Leak Repairs charges in Delhi
Concealed & visible leaks traced and sealed before they spread.
| Job | Indicative price |
|---|---|
| Visible leak repair (tap, trap, visible joint) | ₹350 – ₹800 |
| Concealed leak tracing | ₹800 – ₹2,000per visit |
| Concealed joint repair after tracing | ₹1,200 – ₹4,500 |
| Overhead / underground tank leak repair | ₹900 – ₹3,000 |
| Angle valve or connector replacement | ₹250 – ₹600per fitting |
These are indicative ranges for typical jobs, not quotes. You see the actual price for your job before you confirm the booking. A visiting charge of ₹99–₹149 applies where an inspection is needed, and it is adjusted against your final bill. Materials are billed separately and itemised on your digital invoice.
Pricing
Pipe Work charges in Delhi
Supply & drainage piping, replacements and blockage clearing.
| Job | Indicative price |
|---|---|
| Sink / basin blockage clearing | ₹400 – ₹900 |
| Drain machine cleaningFor hardened grease or long runs. | ₹1,200 – ₹2,800 |
| Supply pipe replacement | ₹450 – ₹1,100per running metre |
| Floor trap / gully replacement | ₹500 – ₹1,200per trap |
| Washing machine outlet point | ₹600 – ₹1,500 |
These are indicative ranges for typical jobs, not quotes. You see the actual price for your job before you confirm the booking. A visiting charge of ₹99–₹149 applies where an inspection is needed, and it is adjusted against your final bill. Materials are billed separately and itemised on your digital invoice.
Pricing
Inverter Setup charges in Delhi
Inverter & battery installation, wiring and backup load planning.
| Job | Indicative price |
|---|---|
| Inverter & battery installation | ₹800 – ₹1,600 |
| Separate backup circuit wiringDepends on how many points go on backup. | ₹2,500 – ₹7,000 |
| Inverter shifting / re-installation | ₹600 – ₹1,200 |
| Battery terminal service | ₹300 – ₹600 |
| Backup fault diagnosis | ₹400 – ₹900per visit |
These are indicative ranges for typical jobs, not quotes. You see the actual price for your job before you confirm the booking. A visiting charge of ₹99–₹149 applies where an inspection is needed, and it is adjusted against your final bill. Materials are billed separately and itemised on your digital invoice.
Pricing
Water Tank Services charges in Delhi
Tank fitting, cleaning, motor & float-valve servicing.
| Job | Indicative price |
|---|---|
| Overhead tank cleaning (up to 1,000 L) | ₹800 – ₹1,500per tank |
| Underground tank cleaningVaries with capacity and access. | ₹1,500 – ₹3,500per tank |
| Float valve replacement | ₹250 – ₹600 |
| Pump / motor servicing | ₹500 – ₹1,400 |
| Foot valve replacement | ₹600 – ₹1,500 |
These are indicative ranges for typical jobs, not quotes. You see the actual price for your job before you confirm the booking. A visiting charge of ₹99–₹149 applies where an inspection is needed, and it is adjusted against your final bill. Materials are billed separately and itemised on your digital invoice.
Coverage
These rates apply across Delhi
Every area below is covered at the same rates — there is no premium for a particular sector or society.
Book directly
Hire in Delhi
- Electricians in DelhiBackground-verified electricians across Delhi NCR for fans, wiring, switchboards, MCBs and inverters — with upfront pricing and a 30-day guarantee.
- Plumbers in DelhiVerified plumbers across Delhi NCR for leaks, blocked drains, taps, cisterns and water tanks — traced properly, priced upfront, guaranteed 30 days.
- All services in DelhiBook background-verified electricians and plumbers across Delhi — from Dwarka to Saket, Rohini to Lajpat Nagar. Transparent pricing, same-day service and a 30-day guarantee.
Compare
Rates in other Delhi NCR cities
Get the exact price for your Delhi job
Describe the problem and you will have a quote before anyone is dispatched.